They are present in various styles and sizes. Most framed bathroom mirrors are usually attached with brackets or wires, the same as the picture is hung. Usually, this thing is done when someone is renovating their home. Do you ever try to fix the bathroom vanity mirror over the clips?
Many people always wanted to fix the mirror over the plastic clips, but they didn’t know the method. People love framing their bathroom mirrors as they look somewhat different. The mirror frame with clips and the mirror, which is frameless, both very different. And you are indeed here for one reason: how to fix these clips. It is one of the simplest methods I have ever gone through. Now I will guide you on how you can easily frame the mirror. Moreover, I am sure that you will easily hang your bathroom mirror after this method.
Things You Will Need:
- Mirror Clips
- A Mirror
- A level
- Pencil
- Drill Machine
- Utility knife
- Screws
Follow This Step By Step Guide to Install a Mirror
Clean The Wall
First, you need to clean the wall finely so that there should not be any prominent substance present or dirt is present, which can disturb the mirror attachment. So, it is suggested to clean the wall before applying any adhesive.
Use A-Level and Take Measurements
You need to cut the wood to the measurement at an angle of 45 degrees. Moreover, the measurement should be taken at an exact and accurate level. You can use a marker and scale or any other instrument for taking proper measurements.
Mark The Spots And Positions For Clips
Put the piece of wood against the frameless mirror and blot the position of the mirror clips with a marker. You have to mark the spots and positions for the clips at which the mirror has to be attached.
Drill Holes
Using a utility knife, make slices in the wood between the marks.
Now color the pieces from both sides, front and back. However, People usually forget to color the backside, but it is reflected, so it should look nice. Furthermore, Now use liquid nails for making the back frame of the pieces. Now for keeping the frame in a place while the glue is drying, use a bar of painter’s tape.
Install The Clips In The Upper and Lower Anchor
Install the clips in upper and lower anchors. When the clips get installed in their place, the mirror can be installed.
Install the Mirror
Now it is time to hang the mirror. When installing the mirror there may be an empty gap between the mirror and the sink; place some pieces of wood in that area to prevent the mirror from slipping while the glue dries. It is a straightforward way to install your bathroom mirror now it’s done.
In The End!
So, above was the best possible method for hanging the bathroom mirrors on the wall via clips. Mirror clips are usually placed at the top and bottom sides of the mirror wall. Moreover, clips are used for additional support. Or else it can be hung through adhesive glue binding. However, mirror clips can hold up to 20 to 30lbs but not more than that. Now just rest your thoughts on how to hang a mirror!
